|
VideoSecu full motion articulating tilting swivel TV LCD wall mount bracket arm for 37"-55" LCD LED LFD TV Super Strong Single Arm 27" Extension Swivel Flat Panel Television LCD Plasma Tilt Wall Mount Free 7 ft HDMI cable W13 | 
 enlarge
| Brand: VideoSecu
Category: CE
List Price: $399.00
Buy New: $67.23
You Save: $331.77 (83%)
(as of 9/8/10 11:21 PDT - Details)
New (3) from $67.23
Rating:  88 reviews
Color: Silver
Media: Misc.
Shipping Weight (lbs): 20
Dimensions (in): 32 x 10.5 x 6
MPN: MP27B
Model: MP27B
ASIN: B000WXH1Z2
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | VideoSecu TV wall mount. Report to Amazon. com if the one you received do not bear VideoSecu logo. | | • | Fits up to VESA700x400 or smaller pattern. Fits most 37" to 55" LCD screens; 15 degree tilt up/down. | | • | Offers up to 180ยบ of swivel (depending on screen model); 2-stud mounting ( up to 25" wide stud ) | | • | Super strong hinged long arm extends TV from 5" to 27" off the wall. | | • | Max loading capacity 180 lbs; Standard mounting hardware included. |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
The single articulating arm, which attaches to any wall, creates the perfect viewing angle for your TV with 180 degree lateral rotation, tilt and swivel. The Articulating LCD Wall Arm supports most 37" up to 55" plasma TV. It folds flat against the wall or extends out up to 27". The single arm design provides easy one-touch tilt and up to 180 degrees of swivel for virtually limitless viewing positions. Fits VESA200x200, 300x300, 400x200, 400x400, 500x200, 600x400, 600x200, 660x400, 700x400 and any mounting hole pattern between 200 and 700mm (wide) by 200 to 400mm (High). Fits most flat panel LCD TVs up to 55". Heavy-gauge steel construction. Lift-N-Lock design offers easy installation. Please check the back of your LCD to make sure if the mount fits your monitor or TV. Note: please check what mount your TV requires before place your order. Do not pick the mount by the screen size of your TV. Will This mount Fit my Plasma TV? First check the weight of the TV. It must be less than 180 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within - 18.89 inch, horizontal distance within 29.92 inch, then this bracket will fit. If you currently have a stand attached to your LCD TV this is usually removed prior to fitting the wall mount. Third, the width of your TV should be 36" or above. Otherwise the mount is too wide to hide behind your TV. We have a smaller tilt mount for 23" - 37" TV in our Amazon store. The mount is in black color. VideoSecu brand TV wall mount. Please report to Amazon if the product you received do not bear VideoSecu logo.
|
| Customer Reviews:
Showing reviews 1-5 of 88
 Great Wall Mount Purchase July 23, 2008
Joshua Schreiber (Salt Lake City, UT)
37 out of 37 found this review helpful
I've had the swivel mount for a few weeks now and I'm so glad I purchased this model. It was an easy set up and does everything its supposed to. I was a little leary to put our 42" 60lb tv on it up in the air, but once we got it all set up it was the best decision I'd made. I was thinking of just buying an angled mount without the extension capabilities, but that would have been such a pain to get all the wiring hooked to and hidden behind the tv. With this set up we are able to make easy cable adjustments, and either pull the tv out, angle it further up or down and push it back to the wall to give it a more fit look. I strongly sugges purchasing this product and would buy it again if I needed to.
Works fine on SIPs January 30, 2010
J. E. Atkinson (Maine, USA)
7 out of 7 found this review helpful
I installed this TV wall mount on an outside wall between two windows. Inside the house, of course. It came with a ton of mounting hardware to choose from. (Just what I need...a lot of extra screws and bolts to sit in my tool closet for the next 20 years.) The nice thing about SIPs, or structured insulated panels, is that you can throw your screws in anywhere on them -- no studs to hunt for. Just be careful to avoid electric chases in the walls. I watched my house being built so I knew where they all were. I was a little concerned about the OSB being strong enough to hold this monster-heavy unit, not to mention the 40-lb LED HDTV going on it, so I used all six mounting screws, spacing them out in the slots along the mount's back panel. Everything has worked fine. So if you have a SIPs house, rest assured you can use this unit on it.
Taking a tip that I read online somewhere, I first disassembled all three pieces of the mount, put the wall part up first, then put the arm back on it, then put the TV part onto the TV, and finally hung the TV on the arm. Sounds easy, right? Well, this was actually a 3-person job, both because of the weight of the unit as well as the height we were mounting it at on the wall, between 4-5' up. I lured my nephew and his wife over for dinner, and then put them to work earning it. Actually he did most of the work while I helped, with his wife occasionally looking up from her magazine when asked to comment on the alignment, or to grab a tool. Putting the TV on the arm involved all three of us. Made the job go quickly and smoothly. With only two people, there would have have been some awkward, tricky moments and extra strain. Yes, I'm a woman, how'd you guess? I don't have a problem asking for help.
Tip: To avoid sagging, all joints on the mount must be tightened once assembled. This makes the joints stiff, and closing the unit becomes a two hand job, pushing the TV back against the wall while holding it at the top and bottom rims.
Tip: If you are centering the mount between windows, shelves, or anything else, be sure to center it while it's still assembled. The back plate that goes on the wall will be OFF-center. ...Yes, this is the voice of of experience speaking. We had to hang the thing twice. And now that you've read this tip, you won't have to!
Great selection no need to look any Further October 11, 2008
Russell G. Phillips (Fort Mill, SC)
6 out of 6 found this review helpful
I am a very skeptical purchaser and This product works great! I Just purchased a new LG 47 inch flat pannel from HH Greg and when I went to the section of mounting the LCD it cost at least 129.00 for just a cheap model to mount on the wall without the swinging arm. So I went on the web and found this product and started to read the positive feedback.
I read many articals about sway and sag also difficulty on installation. The install took about 2 hours after the hardest part was finding the stud in the wall. The mounting hardware had more than enough with plenty more parts to put in my storage draw. It looks good over the fire place and is a nice addition to my area. The best price for something like this is at least $200 from Best buy or HH greg. I have no stakes in this manufacture just needed a few comments like this to believe that this is the one.
Does What It Should March 5, 2010
J. Antonio (CA, USA)
5 out of 5 found this review helpful
When I ordered the mount I was a little worried that it would be loose and have badly fitting parts. Not so! It is very sturdy and the slots for mounting span 16" so putting lag bolts into studs was very easy. The whole mounting process took only about half an hour.
Just to see how strong it was I did a pull-up on the swing arm. No problem! I go about 235lbs, so it got a real work out. Because I was putting the flat screen in a corner I needed the long swing arm, and it worked out just perfect. It's nice to get a product that is economical and works - the first time!
Good product, needs better instructions December 23, 2008
Amy T (Carbondale, IL)
4 out of 4 found this review helpful
The product is good, I am happy with it. The instructions are terrible! You pretty much need to just look at the picture on the box and figure it out! It does hold my 42" plasma on the wall very securely though.
Showing reviews 1-5 of 88
|
|
|
| |
